| Model Name |
R3128 |
| Part Number |
JR3128-1N |
| Form Factor | Pico-ITX 2.5" (100 x 72mm) |
| Processor | Rockchip® RK3128 4-core 1.2GHz SoC, Cortex A7, Armv7-A |
| Memory | Onboard 2GB DDR3L-1066, non-expandable
Onboard 8GB eMMC, non-expandable |
| Graphics | Mali-400 MP2 GPU,Supports OpenGL ES1.1/2.0 |
| Audio | Everest Semiconductor ES8316 Audio |
| 3G/4G/LTE | 1 x SIM Card Socket for 3G/4G/LTE |
| WiFi | 1 x RTL8723BS for 802.11 b/g/n, 2.4GHz & BT 4.0 |
| LAN | 1 x Realtek RTL8211E Gigabit LAN |
| Storage | 1 x Micro SD Socket up to 64G |
| Expansion | 1 x Mini PCI-E Slot (Full-size with USB Bus) |
| Rear Panel Connectors |
| External IO |
1 RJ45 Gigabit LAN
2 USB 2.0
1 HDMI (1920 x 1080 @ 60Hz)
1 IR Receiver
1 OTG
1 Micro SD Socket
1 SIM Card Socket
1 3.5mm Audio (Line out)
1 12V DC-in Jack
|
| Onboard I/O Connectors |
| Internal IO |
1 24-bit Single Channel LVDS (1280 x 800 60Hz)
1 MIPI CSI (for Camera)
1 Serial Headers (RS232)
1 USB Headers for 1 * USB 2.0
1 GPIO/I2C Header
1 Speaker Out (Line out)
|
| Power Supply for R3128 |
|
External Power Supply – the board can be powered with a +12V external power supply though a DC connector on the back panel. The rear +12V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12V and the shell is GND.
|
| Market Segments Supported |
√ IoT
√ Industrial Automation/Control
√ Smart Access Control
|
| Environment |
Operating Temperature : -10 ~ 60°C with 0.7 m/s air flow
Storage Temperature : -20 ~ 70°C
|
