| Model No. | NU93-2930 |
| Part No. | JNU93-2930 |
| Jetway NU93 NUC Motherboard Specification |
| Processor | INTEL® Bay Trail-M Celeron N2930 SoC Processor 1.83GHz, Quad-Core, 7.5W
* Low-profile Heatsink & Fan Installed for Bench Testing |
| Memory | 1 * 204-pin DDR3L-1333 SO-DIMM Single Channel up to 8 GB (1.35V required) |
| Graphics | Intel® HD Graphics |
| Audio | Realtek ALC887 Audio CODEC with SPDIF out |
| LAN | 2 x Intel® 82583V Gigabit Ethernet |
| Storage | 1 x full size mSATA Slot
1 x SATA2 3Gb/s Connector |
| Super IO | FINTEK F81803U |
| Form Factor | NUC Form Factor (101mm X 101mm) |
| Back Panel Connectors |
2 USB 2.0 ports
2 RJ-45 ports (10/100/1000)
2 HDMI
1 Audio line out with SPDIF out
1 9V ~ 24V DC-in jack
|
| Front Panel Connectors |
1 RS232/422/485 COM port
1 USB 3.0
1 USB 2.0
|
| Onboard I/O Connectors |
1 Full size mSATA Slot
1 Half size mini PCI-E Slot
1 SATA2 3Gb/s Connector
1 USB Pin Headers (2.0 mm pitch) for up to 2 additional USB 2.0 Ports
1 4-pin Speaker header with 3W Amplifier
1 AT/ATX Mode Select Jumper
1 4-pin COM port 5V 12V Jumper
1 2-pin Security Measures Jumper
1 3-pin Fan Connector
1 4-pin Front Panel Connector
1 4-pin Power-out Connector (Male) for 2.5" HDD
1 2-pin +9 ~ +24V Power-in Connector (Molex 5566-2) for Alternate Internal Power Supply
|
| Power Supply for NU93 |
External Power Supply – the board can be powered with a +9V ~ +24V external power supply though a DC connector on the back panel. The rear +9V ~ +24V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +9V ~ 24V (±5%) and the shell is GND.
Internal Power Supply – the board can alternatively be powered via the internal +9V ~ +24V DC 1 x 2 power connector. The internal 1 x 2 power connector is a Molex 5566-2 header which accepts a Molex 5557-02R connector from the power supply.
Caution: There is no isolation circuitry between the external +9V ~ +24V DC jack and the internal 1 x 2 power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +9V ~ +24V DC jack is covered if the internal 1 x 2 power connector is to be used.
|
| Market Segments Supported |
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server
√ Thin Client
√ HTPC
|
| Environment |
Operating Temperature : 0 ~ 40°C
Storage Temperature : -20 ~ 85°C
|
