| Model Name | NU92 |
| Part Number | JNU92-4300U |
| Form Factor | NUC (101 x 101mm) |
| Processor | INTEL Core i5-4300U, 1.9GHz, 2.90GHz Burst, Dual-core, Hyper-Threading , Haswell ULT, vPro, Virtualization, 22nm, 15W
* Low-profile Heatsink & Fan Installed |
| Memory | 2 * 204-pin DDR3L-1600 SO-DIMM Dual Channel up to 16GB, 1.35V required |
| Graphics | Intel® HD Graphics |
| Audio | Realtek ALC662 Audio CODEC with SPDIF out |
| LAN | 1 x Intel® I218-LM PHY Gigabit LAN (iAMT 9.5) |
| Storage | 1 x Full size mSATA Slot
1 x SATA3 6Gb/s Connector |
| Super IO | FINTEK F81803U |
| TPM | Intel fTPM 2.0 (PTT) Trusted Computing Firmware |
| Back Panel Connectors |
1 RJ-45 ports (10/100/1000)
2 USB 3.0 ports
2 HDMI 1.4 (4096 * 2304 @ 24Hz)
1 Audio line out with SPDIF out
1 9V ~ 24V DC-in jack
|
| Front Panel Connectors |
1 Power Button
1 USB 3.0
|
| Onboard I/O Connectors |
1 Full size mSATA Slot
1 Half size mini PCI-E Slot
1 SATA3 6Gb/s Connector
1 Serial Header (RS232/422/485, 2.0 mm pitch)
1 USB 2.0 Header (2.0 mm pitch)
1 Stereo Audio Amplifier Header 3W (Left+Right)
1 AT/ATX power switch mode jumper
1 3-pin Fan Connector
1 4-pin SATA Power Out Connector
1 4-pin Front Panel Connector
1 2-pin +9 ~ +24V Power-in Connector (Molex 5566-2) for Alternate Internal Power Supply
|
| Power Supply for NU92 |
External Power Supply – the board can be powered with a +9V ~ +24V external power supply though a DC connector on the back panel. The rear +9V ~ +24V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +9V ~ 24V (±5%) and the shell is GND.
Internal Power Supply – the board can alternatively be powered via the internal +9V ~ +24V DC 1 x 2 power connector. The internal 1 x 2 power connector is a Molex 5566-2 header which accepts a Molex 5557-02R connector from the power supply.
Caution: There is no isolation circuitry between the external +9V ~ +24V DC jack and the internal 1 x 2 power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +9V ~ +24V DC jack is covered if the internal 1 x 2 power connector is to be used.
|
| Market Segments Supported |
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server
√ Thin Client
√ HTPC
|
| Environment |
Operating Temperature : 0 ~ 40°C
Storage Temperature : -20 ~ 85°C
|
