| Model Name | NU591S |
| Part Number | JU591S-3160 |
| Form Factor | NUC (101 x 101mm) |
| Processor | Fanless Intel® Celeron N3160 SoC, 1.60GHz – 2.24GHz Burst, Quad-Core, 6W TDP/4W SDP, with AES-NI support |
| Memory | 1 x 204-pin SODIMM DDR3L-1600 Dual Channel 1.35V required (up to 8 GB)
* 1600MHz memory will run at 1600MHz
* 1333MHz memory will run at 1066MHz
* 1066MHz memory not supported |
| Graphics | Intel HD Graphics 400, 320MHz - 640MHz |
| Audio | Realtek ALC662VD 4 Channel HD Audio |
| LAN | 2 x Intel I211-AT Gigabit LAN |
| Storage | 1 x Full size mSATA / Mini PCI-E Combo Slot
1 x SATA3 6Gb/s Connector |
| Super IO | FINTEK F81803U |
| Form Factor | NUC Form Factor (101mm X 101mm) |
| Back Panel Connectors |
2 HDMI 1.4b (1920 x 1080 @ 60Hz)
2 USB 3.0 ports
2 RJ-45 ports (10/100/1000)
1 DP 1.1 (2560 x 1600 @ 60Hz or 3840 x 2160 @ 30Hz)
1 Line out / MIC in Combo Jack
1 12V DC-in jack
|
| Front Panel Connectors |
2 USB 3.0
1 RS232/422/485 COM port
|
| Onboard I/O Connectors |
1 Full size mSATA / mini PCI-E Combo Slot
1 Half size mini PCI-E Slot
1 SATA3 6Gb/s Connector
1 USB Pin Header (2.0 mm pitch) for up to 2 additional USB 2.0 Ports
1 Chassis Intrusion Jumper
1 AT/ATX Mode Jumper
1 10-pin GPIO Header
1 5-pin SMBUS Header
1 3-pin Fan Connector
1 4-pin Front Panel Connector
1 4-pin Power-out Connector (Male) for 2.5" HDD
1 SIM Card Holder
|
| Power Supply for NU591S |
|
External Power Supply – the board can be powered with a +12V external power supply though a DC connector on the back panel. The rear +12V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12V (±5%) and the shell is GND.
|
| Market Segments Supported |
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server
√ Thin Client
√ HTPC
|
| Environment |
Operating Temperature : 0 ~ 40°C
Storage Temperature : -20 ~ 85°C
|
