| Model Name | NP591 |
| Part Number | NP591D4-3160 |
| Form Factor | 2.5" Pico-ITX (100 x 72mm) |
| Processor | Fanless Intel® Celeron N3160 SoC, 1.60GHz – 2.24GHz Burst, Quad-Core, 6W TDP, with AES-NI support
* Low-profile Heatsink Installed for Basic Bench Testing |
| Memory | Onboard 4GB DDR3L-1600, non-expandable |
| Graphics | Intel® HD 400 Graphics |
| Audio | Realtek ALC662 Audio |
| LAN | 1 x Intel I211-AT PCI-E Gigabit LAN |
| Storage | 1 x M.2 slot (M-key, 2242 SATA only)
1 x SATA3 6Gb/s Connector |
| Super IO | FINTEK F81803U |
| Form Factor | Pico-ITX Form Factor (100mm X 72mm) |
| Back Panel Connectors |
1 RJ-45 ports (10/100/1000)
1 Display Port 1.1 (upto 2560 x 1600 @ 60Hz or 3840 x 2160 @ 30Hz)
2 USB 3.0 port
1 +12V 2.5mm Diameter Locking DC-In Power Jack
|
| Onboard I/O Connectors |
1 M.2 slot (M-key, Type 2242 SATA SSD only)
1 Full size mini PCI-E Slot
1 SATA3 6Gb/s Connector
1 USB Pin Header (2.0 mm pitch) for up to 2 additional USB 2.0 Ports
2 Serial Port Headers (2.0 mm pitch) (1 * RS232, 1 * RS232/422/485)
1 AT/ATX Mode Select Jumper
1 24-bit Dual Channel LVDS/Inverter (CHRONTEL CH7511B chipset up to 1920 x 1200)
1 9-pin Front Audio Header
1 9-pin Front Panel Connector
1 2-pin LAN LED Header
1 4-pin LVDS 5V/3.3V/12V Select Jumper
1 3-pin Inverter 5V/12V Select Jumper
1 4-pin Power-out Connector (Male)
1 2-pin +12V Alternate Power connector (Molex 5566-2)
|
| Power Supply for NP591 |
External Power Supply – the board can be powered with a +12V external power supply though a DC connector on the back panel. The rear +12V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is 12V and the shell is GND.
Internal Power Supply – the board can alternatively be powered via the internal +12V DC 1 x 2 power connector, where pin 1 is GND and pin 2 is +12 VDC.
Caution: There is no isolation circuitry between the external +12V DC jack and the internal 1 x 2 power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +12V DC jack is covered if the internal 1 x 2 power connector is to be used.
|
| Market Segments Supported |
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server
√ Thin Client
√ HTPC
|
| Environment |
Operating Temperature : 0 ~ 40°C
Storage Temperature : -20 ~ 85°C
|
