| Jetway NF9QU-Q87 Mini-ITX Motherboard |
| Processor | 4th Generation Intel® Core i7 / i5 / i3 / Pentium Processor < 65W
Socket LGA 1150 (Formerly Haswell) |
| Chipset | Intel Q87 (AKA Lynx Point) |
| Memory | 2 x 204-pin SODIMM DDR3-1600 Dual Channel (up to 16 GB) |
| Graphics | Requires Intel Core processor with Intel HD Graphics |
| Audio | Realtek ALC662 5.1 Channel Audio |
| LAN | 1 x Intel i217LM PHY Gigabit LAN (iAMT 9.0)
1 x Intel i211AT PCI-E Gigabit LAN |
| Storage | 4 x SATA3 6Gb/s Ports with RAID 0, 1, 5, 10
1 x Shared mSATA/mini-PCI Express Combo slot (Full-size) |
| Super IO | FINTEK F81866A |
| Back Panel Connectors |
1 +9 ~ +24V DC-in jack (1-pin 2.5mm ID, 5.5mm OD)
1 HDMI (up to 1920 x 1080)
1 DVI-D (up to 1920 x 1080)
1 VGA
2 Serial ports (1 * RS232/422/485 jumperless com port)
4 USB 3.0
2 RJ45 LAN (10/100/1000)
2 3.5mm Audio
|
| Onboard I/O Connectors |
1 PCI-E x4 Slot
1 Shared mSATA/mini-PCI Express Combo slot (Full-size)
1 Mini-PCI Express slot (Half-size)
4 SATA3 6Gb/s Connectors
1 USB Pin Headers for up to 2 additional USB 3.0 Ports
2 USB Pin Headers for up to 4 additional USB 2.0 Ports
1 Nuvoton TPM IC onboard
1 9-pin Audio header
2 Serial Headers (2 * RS232)
1 GPIO header
1 Chassis Intrusion header
1 PS2 Keyboard/Mouse header
2 LAN LED header
1 SPDIFOUT header
1 SMBUS header
1 AT/ATX mode select jumper
1 Front Panel header
3 Fan headers
1 4-pin Molex Power Output (Male)
1 4-pin +9 ~ +24V ATX Power Connector for alternate internal power supply
|
| Power Supply for NF9QU |
External Power Supply – the board can be powered with a +9V ~ +24V external power supply though a DC connector on the back panel. The rear +9V ~ +24V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +9V ~ +24V and the shell is GND.
Internal Power Supply – the board can alternatively be powered via the internal +9V ~ +24V DC 2 x 2 power connector, where pins 1 and 2 are +9V ~ +24V (±5%) DC and pins 3 and 4 are GND. The connector used is Molex Micro-Fit (3mm pitch), right-angled, 4-pos/dual row (2x2).
Caution: There is no isolation circuitry between the external +9V ~ +24V DC jack and the internal 2 x 2 power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +9V ~ +24V DC jack is covered if the internal 2 x 2 power connector is to be used.
|
| Market Segments Supported |
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server
√ Thin Client
√ HTPC
|
| Environment |
Operating Temperature : 0 ~ 60°C
Storage Temperature : -20 ~ 85°C
|
