| Model Series | NF692G4 |
| Part Number | JNF692G4-345 |
| Form Factor | Mini ITX (170 x 170mm) |
| Processor | Intel® Celeron J3455 Processor Quad Core 1.50 GHz - 2.30 GHz, 10W TDP |
| Memory | 1 * 204-pin DDR3L-1866 up to 8GB total, 1.35V required |
| Graphics | Intel HD Graphics 500, 250MHz - 750MHz |
| Audio | NA |
| LAN | 4 x Intel I211-AT Gigabit LAN |
| Storage | 1 x SATA3 6Gb/s Connector
1 x mSATA (Full Size) |
| Super IO | FINTEK F81866A |
| TPM | Intel fTPM 2.0 (PTT) Trusted Computing Firmware |
| Back Panel Connectors |
| External IO |
1 Power LED & HDD LED
1 RJ45 Console Serial port (RS232)
2 USB 3.0
4 RJ45 LAN (10/100/1000)
|
| Onboard I/O Connectors |
| Internal IO |
1 SATA3 6Gb/s Connector
1 mSATA (Full-size)
1 Mini-PCI Express Slot (Full-size, USB signal only)
3 Serial Port Headers (2 * RS232, 1 * RS232/422/485)
1 USB Pin Header for up to 2 additional USB 2.0 Ports
1 19-pin HDMI Header (1920 * 1080 @ 60 Hz)
1 SIM Card Socket
1 AT/ATX Mode Jumper
1 8-bit GPIO Header
1 5-pin SMBUS/I2C Header
1 7-pin PS/2 Mouse/Keyboard Header
1 4-pin Fan Header
1 4-pin SATA Power-out
1 2-pin 12V DC-in Power Connector
|
| Power Supply for NF692G4 |
|
Internal Power Supply – the board can be powered via the internal +12V 2-pin power connector, where pin 1 is +12V and pin 2 is GND. The internal 2-pin power connector accepts a JST VHR-2N or TE 1-1123722-2 plug from the power supply. Or use Jetway G01-PWDCJK-2P20-F DC-in cable which accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm for alternatively 12V AC adapter.
|
| Market Segments Supported |
√ Digital Security & Surveillance
√ High Performance Networking Appliance & Firewall
√ IoT
|
| Environment |
Operating Temperature : 0 ~ 60°C
Storage Temperature : -20 ~ 85°C
Humidity : 10% ~ 90% RH @40°C (non-condensing)
|
