| Jetway NF532 3.5" SBC Motherboard |
| Processor | Intel® Celeron N2930 SoC, 1.83GHz – 2.16GHz Burst, Quad-Core, 7.5W TDP/4.5W SDP
* Ships with passive heatsink installed for bench testing |
| Memory | 1 x 204-pin DDR3L-1333 SO-DIMM up to 8GB (1.35V required) |
| Graphics | Intel HD Graphics, 313MHz - 854MHz |
| Audio | Realtek ALC662 HD Audio
Realtek ALC897 HD Audio (Manufacturered after May 2021) |
| LAN | 2 x Realtek RTL8111G Gigabit LAN with Enhanced Surge Protection
2 x Realtek RTL8111H Gigabit LAN with Enhanced Surge Protection (Manufacturered after May 2021) |
| Storage | 1 x SATA2 3Gb/s Connector
1 x Shared mSATA/mini-PCI Express Combo slot (Full-size) |
| Super IO | FINTEK F81866A |
| Back Panel Connectors |
1 +9V ~ +24V DC-in Jack
1 DVI-D
1 USB 3.0
3 USB 2.0
2 RJ45 LAN (10/100/1000)
1 3.5mm Audio connector (Line-OUT)
|
| Onboard I/O Connectors |
1 SATA2 3Gb/s Connector
1 Shared mSATA/mini-PCI Express Combo slot (full-size)
1 Mini-PCI Express slot (half-size)
4 Serial port headers (3 * RS232, 1 * RS232/422/485)
2 USB Pin Headers for up to 4 additional USB 2.0 Ports
1 VGA Header
1 SIM Card Socket
1 8 bit GPIO Header
1 AT/ATX Mode jumper
1 PS/2 Mouse/Keyboard header
1 Chassis Intrusion header
2 2-pin LAN LED header
1 2-pin SPDIF header
1 4-pin SMBUS header
1 9-pin Audio Connector
1 Front Reset/Power buttons
1 4-pin Fan Header
1 4-pin Floppy Power Output (Male)
|
| Power Supply for NF532 |
External Power Supply – the board can be powered with a +9V ~ +24V external power supply though a DC connector on the back panel. The rear +9V ~ +24V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +9V ~ +24V and the shell is GND.
|
| Market Segments Supported |
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server
√ Thin Client
√ HTPC
|
