| Jetway NF3E 3.5" SBC Motherboard |
| Processor | Intel® Core i5-4300U, 1.90GHz – 2.90GHz Burst, 2-Core 4-Thread, 15W TDP, vPro
* Ships with passive heatsink installed for bench testing |
| Memory | 2 x 204-pin DDR3L-1600 SO-DIMM Dual Channel up to 16GB |
| Graphics | Intel HD Graphics 4400, 200MHz - 1.1GHz |
| Audio | Realtek ALC662 HD Audio codec |
| LAN | 1 x Intel i218LM PHY Gigabit LAN (iAMT 9.5)
1 x Intel i211AT PCI-E Gigabit LAN |
| Storage | 1 x SATA3 6Gb/s Connector
1 x Shared mSATA/mini-PCI Express Combo slot (Full-size) |
| Super IO | FINTEK F81866A |
| Back Panel Connectors |
1 3.5mm Audio connector (Line-OUT with SPDIF Out)
2 HDMI
4 USB 3.0
2 RJ45 LAN (10/100/1000)
2 USB 2.0
1 +9V ~ +24V DC-in Jack
|
| Onboard I/O Connectors |
1 SATA3 6Gb/s Connector
1 Shared mSATA/mini-PCI Express Combo slot (full-size)
1 Mini-PCI Express slot (half-size)
4 Serial port headers (3 * RS232, 1 * RS232/422/485)
2 USB Pin Headers for up to 3 additional USB 2.0 Ports
1 24-bit dual channel LVDS connector/inverter (CHRONTEL CH7511B chipset up to 1920 x 1200)
1 8 bit GPIO Header
1 AT/ATX Mode jumper
1 PS/2 Mouse/Keyboard header
1 Chassis Intrusion header
2 2-pin LAN LED header
1 2-pin SPDIF header
1 4-pin SMBUS header
1 9-pin Audio Connector
1 Front Reset/Power buttons
1 4-pin Fan Header
1 4-pin Floppy Power Output (Male)
|
| Power Supply for NF3E |
External Power Supply – the board can be powered with a +9V ~ +24V external power supply though a DC connector on the back panel. The rear +9V ~ +24V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +9V ~ +24V and the shell is GND.
|
| Market Segments Supported |
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server
√ Thin Client
√ HTPC
|
