| Jetway NF35 3.5" SBC Motherboard |
| Processor | AMD G-T56N Dual Core 1.6GHz / G-T40E 1.0GHz APU |
| Chipset | AMD® Hudson M1 chipset |
| Memory | 1 x DDR3 800/1066 Single Channel SO-DIMM slot (up to 4 GB)
(Tested Memory List) |
| Graphics | Integrated ATI Radeon HD 6310 at 500MHz / Radeon HD 6250 at 280MHz |
| Audio | Realtek ALC662 5.1 Channel HD Audio codec |
| LAN | 1 x Realtek RTL8111EVL PCI-E Gigabit Ethernet |
| Storage | 2 x SATA3 6Gb/s Connector
1 x CF card slot
1 x mSATA / mini PCI-E (jumper selectable) |
| Super IO | FINTEK F71869A |
| Back Panel Connectors |
1 12V DC Jack
1 DVI-I
4 USB 2.0
2 RJ45 LAN (10/100/1000)
1 3.5mm Audio connector (Line-OUT)
|
| Onboard I/O Connectors |
1 Compact Flash Type I/II Socket
1 mini PCI Express / mSATA Slot (jumper selectable)
4 Serial RS232 COM header (COM1 for RS232/422/485 jumper selectable)
2 SATA3 6Gb/s Connector
2 USB Pin Headers for up to 4 additional USB 2.0 Ports
1 24-bit dual channel LVDS connector/inverter
1 8 bit GPIO Header
1 CIR Header
1 Front Reset/Power Header
1 Fan Header
1 4-pin Floppy Power Output (Male)
|
| Power Supply for NF35 |
External Power Supply – the board can be powered with a 12 V external power supply though a DC connector on the back panel. The rear 12 VDC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is 12 V and the shell is GND.
|
| Market Segments Supported |
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server
√ Thin Client
√ HTPC
|
