| Jetway NF33 3.5" SBC Motherboard |
| Processor | 1st Generation Intel® Atom N270 @ 2.5W (512K Cache, 1.60 GHz, 533 MHz FSB) |
| Chipset | Intel® 945GSE + ICH7M chipset |
| Memory | 1 x DDR2 400/533 Single Channel SO-DIMM slot up to 2 GB |
| Graphics | Intel GMA950 Integrated Graphics |
| Audio | Realtek ALC662 5.1 Channel HD Audio codec |
| LAN | 1 x Realtek RTL8111DL PCI-E Gigabit Ethernet |
| Storage | 1 x SATA2 3Gb/s Connector
1 x 44-pin IDE Connector
1 x CF Card |
| Super IO | FINTEK F71869E |
| Back Panel Connectors |
1 12V DC Jack
1 DVI-I
4 USB 2.0
1 RJ45 LAN (10/100/1000)
2 3.5mm Audio connector (Line-IN & Line-OUT)
|
| Onboard I/O Connectors |
1 Compact Flash Type I/II Socket
1 mini PCI Express x1 Slot
1 Serial RS232 COM header
1 Serial RS422/485 COM header (12V/5V selectable)
1 44-pin IDE Connector (UDMA 133/100) for 2 HDDs
1 SATA2 3Gb/s Connector
1 USB Pin Headers for up to 2 additional USB 2.0 Ports
1 VGA Header
1 18-bit dual channel LVDS connector/inverter
1 8 bit GPIO Header
1 9-pin Audio Connector
1 Front Reset/Power Header
1 Fan Header
1 4-pin Floppy Power Output (Male)
|
| Power Supply for NF33 |
External Power Supply – the board can be powered with a 12 V external power supply though a DC connector on the back panel. The rear 12 VDC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is 12 V and the shell is GND.
|
| Market Segments Supported |
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server
√ Thin Client
√ HTPC
|
