| Jetway NC9P Mini-ITX Motherboard |
| Processor | 3rd Generation Intel® Atom Dual Core D2550 (1.86GHz@10W) |
| Chipset | Intel ICH10R |
| Memory | 2 x 204-pin DDR3-1066 SODIMM slot Single Channel (up to 4 GB) |
| Graphics | NVIDIA GeForce GT 610M (N13M-GE1-B) with 1GB DDR3 memory |
| Audio | Realtek ALC887 7.1 Channel HD Audio with Optical S/PDIF Out |
| LAN | 1 x Realtek RTL8111F-CG Gigabit LAN |
| Storage | 5 x SATA2 3Gb/s Ports with RAID 0, 1, 5, 10, JBOD
1 x mSATA (mSATA/mini-PCIE shared slot) |
| Super IO | FINTEK F71869A |
| Back Panel Connectors |
2 RS232 Serial port
1 DVI-I (Dual-Link up to 2560 x 1600)
1 HDMI (up to 1920 x 1200)
1 Display Port (up to 1920 x 1200)
4 USB 2.0
1 RJ45 LAN (10/100/1000)
5 Audio Jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In)
1 Optical S/PDIF Out connector
1 12V DC-in Jack
|
| Onboard I/O Connectors |
1 PCI Express Mini Card Slot (full-size, mSATA/mini-PCIE shared)
5 SATA2 3Gb/s Connectors
2 USB Pin Headers for up to 4 additional USB 2.0 Ports
1 4-pin 12V ATX Power Connector for alternate internal power supply
1 4-pin Molex Power Output (Male)
1 19-pin TPM Header
1 2-pin Chassis Intrusion Header
1 2-pin NIC LED
1 9-pin Audio header
1 GPIO header
1 CIR header
1 Front Panel header
3 Fan headers
|
| Power Supply for NC9P |
External Power Supply – the board can be powered with a 12 V external power supply though a DC connector on the back panel. The rear 12 VDC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is 12 V and the shell is GND.
Internal Power Supply – the board can, alternatively, be powered by an internal ATX12V 2 x 2 power connector.
Based on power consumption test results, the recommended power rating is 60 W (12 V/5 A).
Caution: There is no isolation circuitry between the external 12 VDC jack and the internal 2 x 2 power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external 12 VDC jack is covered if the internal 2 x 2 power connector is to be used.
|
| Market Segments Supported |
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server
√ Thin Client
√ HTPC
|
