| Model Name | MU02 |
| Part Number | MU02-03 (32GB eMMC)
MU02-04 (64GB eMMC) | MU02-07 (32GB eMMC, TPM 2.0)
MU02-08 (64GB eMMC, TPM 2.0) |
| Form Factor | NUC (101 x 101mm) |
| Processor | Intel® Celeron J3455 Processor Quad Core 1.50 GHz - 2.30 GHz, 10W TDP (Formerly Apollo Lake) |
| Memory | 1 * 204-pin DDR3L-1866 up to 8GB total, 1.35V required |
| Graphics | Intel HD Graphics 500, 250MHz - 750MHz (J3455) |
| Audio | Realtek ALC662 Audio
Realtek ALC888 Audio (Manufacturered after May 2022) |
| LAN | 2 x Realtek RTL8125 2.5 GbE |
| Storage | 32/64GB eMMC
1 x M.2 (SATA, M-key, 2242)
1 x SATA3 6Gb/s Connector |
| Super IO | FINTEK F81804U |
| TPM | Intel fTPM 2.0 (PTT) Trusted Computing Firmware | Intel fTPM 2.0 (PTT) Trusted Computing Firmware
Onboard NUVOTON TPM v2.0 |
| Back Panel Connectors |
2 HDMI 1.4 (3840 x 2160 @ 30Hz)
1 DP 1.2 (4096 * 2160 @ 60Hz, video only, no audio)
2 USB 3.2 Gen 1 (5 Gb/s)
2 RJ45 LAN (10/100/1000/2500)
3 3.5mm Line-out/Mic Combo Jack
1 12V DC Jack
|
| Front Panel Connectors |
1 USB Type C
1 USB 3.2 Gen 1 (5 Gb/s)
1 RS232/422/485 COM port
|
| Onboard I/O Connectors |
1 SATA3 6Gb/s Connector
1 M.2 M-Key, 2242 (SATA)
1 M.2 E-key, 2230 (USB and PCIe WiFi)
1 USB Pin Headers for 2 additional USB 2.0 Ports
1 8 bit GPIO Header
1 AT/ATX Mode Jumper
1 5-pin SMBUS Header
1 3-pin Fan Header
1 4-pin Power-out Connector for 2.5" HDD/SSD (Mating plug: JST XHP-4)
1 2-pin +12V Alternate Power Connector (Mating plug: JST VHR-2N or TE 1-1123722-2)
|
| Power Supply for MU02 |
External Power Supply – the board can be powered with a +12V external power supply though a DC connector on the back panel. The rear +12V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12V (±5%) and the shell is GND.
Internal Power Supply – the board can be powered via the internal +12V 2-pin power connector, where pin 1 is +12V and pin 2 is GND. The internal 2-pin power connector accepts a JST VHR-2N or TE 1-1123722-2 plug from the power supply. Or use Jetway G01-PWDCJK-2P20-F DC-in cable for alternatively 12V AC adapter.
|
| Market Segments Supported |
√ Industrial/Robotics
√ Factory Automation
√ Retail (POS/Kiosk/Signage)
√ Vision System (Surveillance)
√ Gaming (Slot Machine)
√ Medical
√ Transportation
|
| Environment |
Operating Temperature : 0 ~ 60°C
Storage Temperature : -20 ~ 85°C
Humidity: 10% ~ 90% RH @40°C (non-condensing)
|
