| Model Series | MTX-MTH1 |
| Part Number | MTX-MTH1155H0010 (Core™ Ultra 7 155H)
MTX-MTH1125H0010 (Core™ Ultra 5 125H) | MTX-MTH1155H0210 (Ultra 7 155H, Onboard TPM 2.0)
MTX-MTH1125H0210 (Ultra 5 125H, Onboard TPM 2.0) |
| Form Factor | Mini ITX (170 x 170mm) |
| Processor | Intel® Core™ Ultra 7 Processor 155H, Formerly Meteor Lake, vPro Essentials (Base Power 28W)
Intel® Core™ Ultra 5 Processor 125H, Formerly Meteor Lake, vPro Essentials (Base Power 28W) |
| NPU | Intel® AI Boost |
| Graphics | Intel® Arc™ Graphics |
| Memory | 2 x Dual Channel Non-ECC DDR5-5600 MT/s SODIMM up to 96GB |
| Audio | Realtek ALC897 HD Audio and 3W Amplifier |
| LAN | 2 x Intel I226-V 2.5GbE
1 x Intel I226-LM PCIe 2.5GbE |
| Storage | 1 x SATA3 6Gb/s
1 x M.2 2242/2280 (PCIe 4.0 x4 NVMe or SATA, M-key)
1 x M.2 2242 (PCIe 4.0 x4 NVMe, M-key) |
| Super IO | FINTEK F81966AB |
| TPM | Intel fTPM 2.0 (PTT) Trusted Computing Firmware | Intel fTPM 2.0 (PTT) Trusted Computing Firmware
Onboard NUVOTON TPM v2.0 |
| Back Panel Connectors |
3 RJ45 2.5GbE LAN (10/100/1000/2500)
2 USB 3.2 Gen 2 (10 Gb/s)
2 USB 2.0
4 HDMI 2.1 (3840 x 2160 @ 60Hz, Max Resolution up to 7680 x 4320 @ 60Hz)
1 12V ~ 36V DC-in Jack (4-pin Mini-DIN)
|
| Onboard I/O Connectors |
1 PCIe 5.0 x16 Slot (8 Lanes)
1 SATA3 6Gb/s Connector
1 M.2 M-Key, 2242/2280 (PCIe 4.0 x4 NVMe or SATA)
1 M.2 M-Key, 2242 (PCIe 4.0 x4 NVMe)
1 M.2 E-key, 2230 (USB2.0 and PCIe 3.0 x1 CNVi WiFi)
1 M.2 B-key, 3042 3052 (USB3.2/2.0 and PCIe 3.0 x1 for Cellular)
1 USB Header for 2 additional USB 3.2 Ports
2 USB Headers for 4 additional USB 2.0 Ports
6 Serial Headers (4 * RS232, 2 * RS232/422/485)
1 24-bits Dual Channel LVDS/eDP (1920x1200 @60Hz)
1 Nano SIM Socket
1 8 bit GPIO Header
1 AT/ATX Mode Jumper
1 9-pin Front Audio Header
1 5-pin I2C Header
1 5-pin SMBUS Header
2 Fan Header
1 4-pin Alternate Power-in Connector
|
| Power Supply for MTX-MTH1 |
External Power Supply – the board can be powered with a +12V ~ +36V external power supply though a DC connector on the back panel. The rear +12V ~ +36V DC jack accepts plugs with a 4-pin Mini-DIN connector.
Internal Power Supply – the board can alternatively be powered via the internal +12V ~ +36V DC 2 x 2 power connector, where pins 3 and 4 are +12V ~ +36V (±5%) DC and pins 1 and 2 are GND. The connector used is Molex Micro-Fit (3mm pitch), right-angled, 4-pos/dual row (2x2).
Caution: There is no isolation circuitry between the external +12V ~ +36V DC jack and the internal 2 x 2 power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +12V ~ +36V DC jack is covered if the internal 2 x 2 power connector is to be used.
|
| Market Segments Supported |
√ Edge Computing
√ Digital Signage
√ Industrial PCs
√ Factory Automation
√ Public Sector
√ Digital Security
√ Surveillance Application
|
| Environment |
Operating Temperature : -20 ~ 60°C
Storage Temperature : -20 ~ 85°C
Humidity: 10% ~ 90% RH @40°C (non-condensing)
|
