| Model Series | MP21 |
| Part Number | MP21-62100 | MP21-62104 (64GB eMMC) |
| Form Factor | Pico-ITX (100 x 72mm) |
| Processor | Intel® Celeron N6210, 1.20GHz – 2.60GHz Burst, 2-Core 2-Thread, 6.5W TDP
* Ships with flat silver aluminum heatsink for direct attach |
| Memory | Onboard 4GB or 8GB LPDDR4-3200, non-expandable |
| Graphics | Intel® UHD Graphics for 10th Gen Intel® Processors |
| Audio | Realtek ALC897 HD Audio |
| LAN | 2 x Realtek RTL8119I 1GbE |
| Storage | 1 x M.2 (SATA/PCIe 3.0 x1/USB3.1, B+M-key 2242)
*Cellular card only usable on MP21-62104 model | 1 x M.2 (SATA/PCIe 3.0 x1/USB3.1, B+M-key 2242)
Onboard 64GB eMMC |
| Super IO | FINTEK F81966 |
| TPM | Intel fTPM 2.0 (PTT) |
| Back Panel Connectors |
1 USB 3.2 Gen 2 Type-C (10 Gb/s)
1 HDMI 2.0b (4096 * 2160 @ 60Hz)
2 RJ45 LAN (10/100/1000)
1 USB 3.2 Gen 2 (10 Gb/s)
1 USB 2.0
|
| Onboard I/O Connectors |
1 M.2 B+M-key 2242/3042/3052 (SATA/PCIe 3.0 x1/USB3.1) *Cellular card usable only on MP21-62104 model
1 M.2 E-key, 2230 (PCIe 3.0 x1/USB 2.0 for WiFi)
2 Serial Headers (2 * RS232/422/485)
1 USB Pin Headers for 2 additional USB 2.0 Ports
1 24-bits Dual Channel LVDS (1080p @ 60Hz) or eDP (4K @ 60Hz)
1 Nano SIM Socket
1 8 bit GPIO Header
1 9-pin Front Audio Header
1 AT/ATX Mode Jumper
1 Chassis Intrusion Jumper
1 2-pin +12V Power-In (Mating plug: JST VHR-2N or TE 1-1123722-2)
|
| Power Supply for MP21 |
|
Internal Power Supply – the board can be powered via the internal +12V 2-pin power connector, where pin 1 is +12V and pin 2 is GND. The internal 2-pin power connector accepts a JST VHR-2N or TE 1-1123722-2 connector from the power supply. A 12V DC-in 5.5/2.5mm barrel jack cable included.
|
| Market Segments Supported |
√ Industrial PC
√ Factory Automation
√ Retail (POS/Kiosk/ATM/Digital Signage)
√ Digital Security / Surveillance
√ Panel PC
√ Mini PC
|
| Environment |
Operating Temperature : -20 ~ 60°C
Storage Temperature : -20 ~ 85°C
Humidity: 10% ~ 90% RH @40°C (non-condensing)
|
