- 6th / 7th Gen Intel® Core i7 / i5 / i3 / Pentium Processor
- Long-Life Embedded Class with Planned Lifecycle Through Q3'2022
- 2 * Intel Gigabit LAN with iAMT 11.0 & vPRO Support
- 6 * COM / 6 * USB / Supports 3 Displays DP, HDMI, LVDS
- PCI-E x4 side-slot, Supports Jetway ETC4G & ETC4B Expansion Modules
- ECO-design for EuP/ErP

Specification
Jetway NF697-Q170 Mini-ITX Motherboard
Processor6th / 7th Gen Intel® Core i7 / i5 / i3 / Pentium Processor
Socket LGA 1151 (Formerly Skylake and Kaby Lake)
ChipsetIntel Q170
Memory2 x 260-pin SODIMM un-buffered Dual Channel DDR4-2133 up to 32GB Total
GraphicsRequires Intel Core processor with Intel HD Graphics
AudioRealtek ALC662VD HD Audio
LAN1 x Intel I219-LM PHY Gigabit LAN (iAMT 11.0)
1 x Intel I211-AT PCI-E Gigabit LAN
Storage4 x SATA3 6Gb/s with RAID 0, 1, 5, 10 , JBOD
Super IOFINTEK F81866A
TPMIntel fTPM 2.0 (PTT) Trusted Computing Firmware
Option: Onboard TPM v1.2 or v2.0
Back Panel Connectors
1 9~24V DC-in Jack (1-pin 2.5mm ID, 5.5mm OD)
2 DP 1.2 (4096 * 2304 @ 60Hz)
1 HDMI 1.4 (4096 * 2304 @ 24Hz)
2 Serial Port (2 * RS232/422/485)
2 RJ45 LAN (10/100/1000)
4 USB 3.0
3 3.5mm Audio Jack

Onboard I/O Connectors
1 PCI-E x4 Side-Slot, Supports Jetway ETC4G & ETC4B Expansion Modules
1 PCI Express Mini Card Slot (Full-size)
4 SATA3 6Gb/s Connectors
1 USB Pin Headers for up to 2 additional USB 2.0 Ports (2.00mm pitch)
4 Serial Headers (4 * RS232 with 2.00mm pitch)
1 24-bits Dual Channel LVDS Connector/Inverter
1 Nuvoton TPM IC onboard (for NF697T)
1 SIM Card Holder
1 Chassis Intrusion Jumper
1 AT/ATX Mode Jumper
1 10-pin GPIO Header
1 7-pin PS2 Keyboard Mouse Header
8 2-pin LAN LED Headers
1 9-pin Front Panel Header
2 4-pin Fan Headers
1 2-pin Internal Power connector (Molex 5566-2)
1 SATA Power connector
Power Supply for NF697
External Power Supply – the board can be powered with a +9V ~ +24V external power supply though a DC connector on the back panel. The rear +9V ~ +24V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +9V ~ +24V and the shell is GND.

Internal Power Supply – the board can alternatively be powered via the internal +9V ~ +24V DC 1 x 2 power connector, where pin 1 is GND and pin 2 is +9V ~ +24V VDC. The internal 1 x 2 power connector is a Molex 5566-2 header which accepts a Molex 5557-02R connector from the power supply.

Caution: There is no isolation circuitry between the external +9V ~ +24V DC jack and the internal 1 x 2 power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +9V ~ +24V DC jack is covered if the internal 1 x 2 power connector is to be used.
Market Segments Supported
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server
√ IoT
Environment
Operating Temperature : 0 ~ 60°C
Storage Temperature : -20 ~ 85°C

1 Depends on specific processors to support VT-d & TXT, please visit Intel website for details.

Ordering Info
Part Number Description
JNF697-Q170 Mini ITX motherboard
JNF697T1-Q170 Mini ITX motherboard with TPM 1.2
JNF697T2-Q170 Mini ITX motherboard with TPM 2.0
F04-MB-053-F (Incl) IO shield for JNF697
G01-SATA3-BL-1F (Incl) SATA3 cable
G02-DVD22-A13-WF (Incl) DVD driver disk
G01-PW4PS-2S-322F (Incl) SATA power cable
G01-COM9-30A-1F (Incl) COM cable
CPU Support
6th Generation Intel® Core i7 / i5 / i3 / Pentium Processor
i7-6700K
i7-6700
i7-6700T
i7-6700TE
i5-6600K
i5-6600
i5-6600T
i5-6500
i5-6500T
i5-6500TE
i5-6402P
i5-6400
i5-6400T
i3-6300
i3-6300T
i3-6320
i3-6100
i3-6100T
i3-6100TE
i3-6098P
Pentium G4520
Pentium G4500
Pentium G4500T
Pentium G4400
Pentium G4400T
Pentium G4400TE
Celeron G3920
Celeron G3900
Celeron G3900TE
  
7th Generation Intel® Core i7 / i5 / i3 / Pentium Processor
i7-7700K
i7-7700
i7-7700T
i5-7600K
i5-7600
i5-7600T
i5-7500
i5-7500T
i5-7400
i5-7400T
i3-7350K
i3-7300
i3-7300T
i3-7320
i3-7100
i3-7100T
i3-7101TE
i3-7101E
Pentium G4620
Pentium G4600
Pentium G4600T
Pentium G4560
Pentium G4560T
Celeron G3950
Celeron G3930
Celeron G3930T
OS Support List * For Intel 7th Gen CPU, it can only support Windows 10 64-bit. You may be able to install the Windows 7 or 8.1, but the Windows Update won’t work.
Windows Linux
Windows 7 32bit/64bit (USB3.0 driver pre-load required) CentOS 7.0
Windows 8.1 32bit/64bit Debian 8.2
Windows 10 32bit/64bit Fedora 22
Windows Embedded 7 SP1 32bit/64bit (USB3.0 driver pre-load required) openSUSE 13.2
POSready 7 32bit/64bit (USB3.0 driver pre-load required) Ubuntu 15.04
RedHat 7.0
Side-port Expansion Modules Support

Side-port Expansion Modules

Photo

Model

SPEC

Downloads

Ethernet Ports

JETC4B

- Jetway Side-port Expansion Module
- PCIe 3.0 x 4 (8GT/s)
- 2-pair Gigabit LAN Bypass
- Pericom PI7C9X2G608GP Gen 2 Switch
- Intel i211-AT Gigabit Ethernet Controller
- Support Wake on LAN S1/S3/S4/S5 mode
- 170 x 91.8 mm
- RoHS Compliant

 Driver for Windows

JETC4G

- Jetway Side-port Expansion Module
- PCIe 3.0 x 4 (8GT/s)
- 4 additional Gigabit Ethernet Ports
- Pericom PI7C9X2G608GP Gen 2 Switch
- Intel i211-AT Gigabit Ethernet Controller
- Support Wake on LAN S1/S3/S4/S5 mode
- 170 x 91.8 mm
- RoHS Compliant

 Driver for Windows

Downloads
NF697 BIOS A01 Release Date 2017-5-19
Description Initial BIOS for production.
Download  F697AA01.zip
Installation Instructions 1. Prepare a MS-DOS bootable flash drive.
2. Download the zip file.
3. Unzip the file and copy to the flash drive.
4. Reboot the PC with the bootable flash drive into MS-DOS mode and run *.bat in command prompt.
5. Wait in suspense until the update finished.
Revised History [A01]. Initial BIOS.

· Please do not flash the BIOS UNLESS your system has a BIOS-related issue. Flashing the wrong BIOS can cause irreparable damage to the system.
· Please be aware that by flashing this BIOS you agree that in the event of a BIOS flash failure, you must contact your dealer for a BIOS replacement. There are no exceptions to this policy. Jetway does not have a policy of replacing BIOS chips directly with end users.


Drivers for NF697
  Windows 7 (32/64 bit) Windows 8 (32/64 bit) Windows 10 (32/64 bit)
Chipset  chipset_inf.zip  chipset_inf.zip  chipset_inf.zip
VGA for 6th & 7th Gen  7_32_bit / 7_64_bit  NA / 8_64_bit  NA / 10_64_bit
Beta VGA for 7th Gen 32-bit  7_32_bit / NA  NA / NA  10_32_bit / NA
LAN  Intellan.zip  Intellan.zip  Intellan.zip
RAPID App  SetupRST.zip  SetupRST.zip  SetupRST.zip
ME  ime_skylake_win7.zip  ime.zip  ime.zip
USB 3.0  usb30_win7.zip  Built-In  Built-In
TPM Hotfix  7_32_bit / 7_64_bit  NA  NA

* For Intel 7th Gen CPU, it can only support Windows 10 64-bit. You may be able to install the Windows 7 or 8.1, but the Windows Update won’t work.

Manual
2.0  G03-NF697-F V2.0.pdf
Resources
FCC  FCC
CE  CE
RoHS  RoHS
Power Consumption Report  Power Consumption Report
Temperature Test Report  Temperature Test Report
Watchdog/GPIO sample code  Watchdog and GPIO sample code for Windows and Linux